masonry wall covering The objective is that the company builds houses บริษัทรับสร้างบ้าน. To be aware is to achieve beauty. and protect the frame wall from external weathering by building a wall material such as building one layer of bricks outside the building
- Wooden rafters or lightweight steel.
- The difference in height between the masonry wall and the inner truss wall depends on the type and method of supporting the rafters.
- Moisture-proof cover is placed on top of the leak-proof sheet.
- Sealant
- Drain hole @ 2′ (610)
- angle iron lintel
- The level difference depends on the details of the door or window frame.
- Brick Lotus
- Sealing plate with drain hole @2′(610)
- Wall coverings
- Moisture-proof cover
- Open the internal opening at least 1″ (25).
- wall covering material
- The protective cover is placed on top of the sealing sheet.
- Drain hole @ 2′ (610)
- Sealant
- Wooden frame or lightweight steel.
- Moisture-proof cover
- The padding is at least 1″ (25) wide.
- wall covering material
- The corrugated bar is attached to the gantry at any distance not exceeding 16″ (405) horizontally and 24″ (610) vertically.
The wall covering material can be used as a wall covering around the building. by supporting it with a steel or concrete frame.
- wall covering material
- Fishtail anchor bolt and space every 16″ (405) vertically
- Sealant
- Drain hole @ 2′ (610)
- Steel bracket to steel embedded in concrete with bolts.
- Flexible sealing material makes the joints expandable. to allow the masonry wall to expand And to prevent deflection due to the transmission of force into the masonry wall, support rods and sealant should be used to cover them completely.
- Precast concrete ridge cover in stone or metal form.
- Sealant on the barrier.
- Reinforced concrete structure.
- Wedge box-shaped steel embedded in concrete every 24″ (610) distance.
- Filled with steel bars and waterproof sealant.
- Flexible sealing material.
- Indoor insulation.
- 2″ to 3″ (51 to 75) slots
- In-cavity insulation.
- Air baffle
- Reinforced concrete frame structure.
- Wall bracket @ 16″ (405)
- Sealant
- Drain hole @ 2′ (610)
- Seal the joints with steel rods and waterproof sealant.
- Flexible sealing material. for horizontal expansion joints
- wall art material
- With vertical expansion joints, it is necessary to divide the wall of the building material into holes.
- The wall bracket is screwed onto the truss.
- The cover plate is placed on the plasterboard wall covering.
- Steel frame
- Sealing plates and drain holes.
- The lower part of the masonry wall and the truss wall are placed on the angle iron.
- The steel frame is screwed and welded to the angle iron. which is embedded with the tip of the concrete floor
- Connect the angle steel to the steel beams of the building.
- Steel frame structure.
- Angle steel trusses help support and fix the wall trusses.
Stone wall panels
Stone wall covering can be done by bringing small stone slabs. Come build with cement mortar and attach it to the concrete wall or the back wall material. By building a house รับสร้างบ้าน using panels or panels from 1½” to 3″ (32 to 75) thickness will be supported by the building’s steel or concrete frame structure.
- Stone wall panels made of whole stone. may be directly attached to the frame structure of the building.
- Stone wall panels may look like a door supported by a sub-frame. which is designed to support the weight of the stone wall and transferred to the building structure This sub-frame consists of vertical braces supported by horizontal crossbars. It will connect the steel bar with the steel frame for the stone wall at the top and bottom ridge.
- Stone wall panels can be made into larger panels. by seizing several thin stone frames The panels are joined together using a non-rusting metal frame. or fastened to the prefabricated concrete panels with anchor bolts and bonding plaster between the joint of the stone slab and the concrete slab To prevent the salt of the cement from coming up on the rock slabs.
Anchor bolt design to hold the stone slabs. must consider the strength of the rock especially around the anchor point as well as the weight acting in the vertical and horizontal lines that must be supported and the expansion or contraction of the structure due to various temperatures and forces Sometimes an anchor must support the weight of the stone and transfer it to the next building structure. while other anchor bolts are used to support horizontal loads only. Fasteners and connectors Should be non-rusting metal or stainless steel. and does not react or discolour the stone surface The installation of the stone slabs should be spaced between the slabs that are appropriate for the mounting material or to support the joints as necessary.
Plywood paneled walls
exterior wall cladding with plywood Typically 4′ × 8′ (1,220 × 2,440) sheets are used, sometimes 9′ and 10′ (2.8 and 3.0 m) long, which are installed as vertical foundation installations. The appearance of the plywood surface may be wood grain grooves, straight lines and coated with water repellent. For veneer coated with resin and melamine This will make the plywood surface smooth suitable for painting.
In the case of horizontal seams It should be covered with either a sealant. This creates a clear slope, so it should be positioned appropriately for the pattern on other exterior walls, such as window and door frames.
